Vanchip (Weijie Chuangxin) has begun mass production of its next-generation WIFI6 High-Power RF front-end module VC5755-51. The main parameters are:
a. Linear output power of 11ax (typical value)
+18dBm MCS11 HE160 43dB DEVM@5V
b. Linear output power of 11ac (typical value)
+22dBm MCS9 VHT80 35dB DEVM@5V
c. TX Gain: 31dB
d. RX Gain: 14.5dB
Supports both 5V and 3.3V voltages
f. Small footprint LGA (16-pin, 3.0*3.0*0.65mm package)
- Maintain lower Icc current under high power.
- Internal framework optimization and upgrade.
- The DEVM performance of high bandwidth is better than the previous generation, meeting performance requirements while reducing power consumption.
- FEM logic control line upgraded to 3 lines, compatible with more main control platform solutions.
- To adapt to changes in market applications, the new product has been optimized for use in the 11be mode, supporting deployment on the WiFi7 platform and meeting cost control requirements.
Q & A:
- Q: Can it be used with WIFI4/5 products?
A: Supports 11a/g/n/ac/ax backward compatibility.
- Q: Can it be used if the logic control only has two wires?
A: When the Bypass mode is not needed, two-wire control can be used.
- Q: Can the specified FEM model by the platform vendor be replaced?
A: Please make sure to confirm with us whether P2P replacement is possible before proceeding with the substitution.
- Q: What is the maximum supply voltage that can be reached?
A: VDD, VCC Max Supply 6V.
- Q: Which frequency bands are supported?
A: Frequency range: 5.15~5.85GHz.
For more information about Vanchip FEM devices, feel free to contact us for inquiries.